• Read the bold text first to familiarise your self with the device.

• All steps require the device be powered.

• To programme tokens 10 examples of each coin is needed.

A view of the MicrocoinSP with the Main light (M), Channnel lights (1, 2, 3), the button and the channel values are marked.

Channel lights (left)

This light show which channel is active by combinations of their value, for example channel 5 is lights 2 and 3.

Channel values (right)

This box displays the original settings for the mechanism and may change between individual devices. It also shows the value assigned to each channel.

1. Disabling old coins

• To start the reprogramming, firstly disable all not used coins/tokens, this is done by pressing the buttons twice which turns the main light red and feeding in the unwanted coin, returning the light to solid green. Repeat for each unwanted coin or token (for UK coins £2, £1, 50p, 20p 10p and 1p).

2. Re-enabling coins

• Press the button once and the main light will flash green, put the coin you want to work again through and the light will change to solid green.

3. Programming for tokens

• Press the button 5 times in quick succession, the main light should now be flashing amber.

—-If you are programming multiple coins/tokens you will need to set the channel, do this by pressing the button, each token needs a new different channel (combination of channel lights).—-

• Insert all ten coins and the light should turn to flashing green.

• Press the button to select the channel of the value you want the token to be.

• For example on the above coin mechanism for a token equal to £1 press the button until 5 (2 and 3 are lit) is displayed.

• Place a coin of the value equal to the token through and then press the button again.

Testing

• Place one token through to test and verify.

These instructions and others are available in .pdf and paper form, please contact us if you would like a copy.